RIGA HEKSA PLUS
Product
Birch plywood (Riga Ply) overlaid with phenol (dark brown, black,
green) or UV-resistant (grey) film on both sides. Face side is with special
surface pattern (WT). The reverse is smooth (F).
Application
Flooring in transport industry, pedestrian bridges, storage and factory floors,
storage shelves, loading platforms, pier surfaces, scaffoldings, ship decks,
shop fitting and flight cases. In general – surfaces where high wear resistance
is required.
Further processing
Plywood can be machined with wood working tools: cutting, drilling, milling,
jointing in length, tongue and groove (T&G), half laps, profiled edges
etc.
Advantages
Surface with high wear resistance, decorative appearance, waterproof, resists
commonly used chemicals and easy to clean. User and environmentally friendly,
hygienic.
Gluing classes
Plywood is glued with waterproof phenol formaldehyde resin adhesive. Bonding is
resistant to weather and boiling water. It meets requirements of the following
standards:
EN 314 / 3 rd class;
BS 1203 / H4 (previously WBP);
DIN 68705 Part 3 / Type BFU 100.
Formaldehyde emission
In accordance with the standard EN 13986 formaldehyde emission
meets the Class E1 requirements. Test method EN 717 Part 2.
Surface pattern
The panels are overlaid with a phenol film and have a special pattern
imprinted during hot pressing process. There are two fundamentally different
surface patterns of wear resistance.
|
Type of overlay |
Taber test results, revolutions |
Rolling test results, revolutions |
|
Riga Heksa Plus |
|
10 000 at least |
|
Riga Heksa Plus Heavy |
|
Edges sealing
Edges of the panels are sealed with acrylic paint.
Sizes
1250 mm x 2500 mm
1525 mm x 3050 mm
Cut to size panels and machining available in accordance with customers’
requirements.
Thickness
6.5, 9, 12, 15,
18, 21, 24, 27, 30, 35 mm.
Tolerance
Size and right angle tolerance meet the standard EN 315
requirements.
|
Nominal thickness, mm |
6,5 |
9 |
12 |
15 |
18 |
21 |
24 |
27 |
30 |
35 |
|
Number of plies |
5 |
7 |
9 |
11 |
13 |
15 |
17 |
19 |
21 |
25 |
|
Average actual thickness, mm |
6,4 |
9,2 |
12,0 |
14,9 |
17,7 |
20,5 |
23,4 |
26,5 |
29,4 |
35,0 |
|
Lower limit, mm |
6,1 |
8,8 |
11,5 |
14,3 |
17,1 |
20,0 |
22,9 |
25,8 |
28,7 |
33,6 |
|
Upper limit, mm |
6,9 |
9,5 |
12,5 |
15,3 |
18,1 |
20,9 |
23,7 |
26,8 |
29,9 |
35,4 |
|
Parameter |
Tolerance |
|
Length, width (mm) |
|
|
Right angle |
± 0,1 % |
|
Edge straightness |
± 0,1 % |
Plywood is manufactured by Latvijas Finieris AS
whose Quality Management System is certified to the requirements of ISO
9001 by Bureau Veritas Quality Certification.
